Pic 1


Market Leaders (ML) distributor for international companies:-

 ELE  HATZ Tramex Proceq Extech Extech Weka  ELE  HATZ Tramex Proceq Extech Extech Weka
Pic 2


  • Temperature Meters
  • Humidity Meters
  • Moisture Meters
  • Light Meters
  • Sound Level Meters
  • Air Velocity Meters
  • Process Calibrators
  • PH Meters
  • Clamp Meters / Oscilloscopes
  • Current and Voltage Detectors / True RMS Power Clamp Meters
  • Thermal Camera
  • Process Calibrators

     cal 412355A: Current and Voltage Calibrator/Meter Precision source for calibrating process devices and measuring DC process signals
    -Oyster case with flip-up display is ideal for handheld or benchtop applications
    -Large 3-1/2 digit LCD display and touch keypad
    -Display readings in mA or as a % of the 0 to 24mA range or as mV in voltage ranges
    -Provides adjustable 0 to 24mA and 0 to 10V calibration source

     cal 422123: Precision Multifunction Calibrator Accurate calibration source for Thermocouple, mA, mV, V and Frequency devices
    -Source DC Current ranges with high 0.001mA resolution
    -Maximum current load 1000Ohm
    -User can set output steps from 1% to 100%
    -Large 5 digit LCD
    -Automatic ramp output
    -Beeps if load is open with Current (mA) output or shorted with Voltage output

     cal 433201: Multi-Type Calibrator Thermometer (115V) Source and measure 8 thermocouple type devices J, K, T, E, C, R, S, and N
    -One model for multiple thermocouple types with precision output displayed as mV or °C/°F
    -Microprocessor assures maximum accuracy to 0.15% of reading over wide ranges
    -High Accuracy Calibration function simulates precision thermocouple outputs for use in calibrating thermometers, transmitters,controllers or recorders.
    -Complete with 115V AC adaptor

    cal 412400: Multifunction Process Calibrator Precision source and measure for thermocouple, mA, mV, and V devices
    -Source 0 to 24mA with 0.01mA resolution
    -Measure 0 to 50mA (0.1mA resolution)
    -Select Type K, J, or T thermocouple for precision calibrations in °F/°C or mV
    -Output 0 to 1999mV or 0 to 10.00V
    -Measure 0 to 19.99V
    -Single/continuous step function for Voltage and Current
    -Self-contained 24V loop power supply drives current loads up to 1000Ohm
    -5 stored calibration values of each type for fast calibrations
    -Complete with six AA batteries and calibration cable with spade lug terminals

     cal CMM-17: Process Calibrator MultiMeter™ Precision DC, mA, Voltage, Frequency Calibrator combined with True RMS MultiMeter
    -Simultaneous source/simulate and measure on large dual display
    -Constant current output for loads up to 1200Ohm
    -Bipolar current (±25mA) and voltage (±1.5V, ±15V) outputs
    -Measure DCmA, ACmA, DCV, ACV, AC+DC, Temperature, Frequency, Duty Cycle, Pulse Width, Resistance, Continuity, and Diode
    -True RMS measurement for non-linear voltage and current loads